Application

Scopes of application:

Private houses / cottages
Apartments
Panoramic glazing / bay windows
Balconies and loggias
Pools / gyms
Socially business rooms

A modern cottage or private house is unthinkable without a modern heating system.

With the help of a plinth heating system, it is possible to provide the house with quality heat. The basis of heat exchange of Warm Plinth is radiation, it is most comfortable for man.

The warm Plinth is installed along the exterior walls or along the perimeter of the room, and the heat from it rises from floor to ceiling. The outgoing heat from the walls is evenly distributed throughout the volume of the room without convection.
Warm Plinth heats the walls. When the houses are operated in traditional heating systems, the walls are “fullfilled” with condensate and become wet. If the structure is wet, the heat protection function stops working, because it is humidity that fundamentally changes the thermal conductivity of all construction materials and reduces the work on insulation of the house to zero, leading to freezing of the walls. When the humidity of the walls increases by only 1% of the weight, the material loses about 10% of its heat-protective properties. And at 60% of the wall humidity the heat-oxidation works in the opposite direction and contributes to the cooling of the structures.
Warm Plinth is the most profitable and cost-effective.

A warm plinth is the optimal solution for creating a healthy climate in a private home.

Deciding which heating of a private house to choose, a person cares not only about economy, but also about his health and the health of his family. How will he and his family feel in their own home?

For a private house you choose only the best. After all, it is a place where at any time of the year you and your family should feel absolutely comfortable.

The installation of a modern plinth heating system, created taking into account the urgent needs and wishes of the owners of country housing, is a serious step in this direction. It is a pre-red investment of funds in the well-being and health of several generations of your relatives and loved ones.
The modern plinth heater helps to combat wet walls and corners, which are the medium for the reproduction of the fungus and mold and at which the risk of respiratory system disease increases.
Practically there is no active convection, therefore the amount of dust in the air is reduced to a minimum, which together with uniform heat distribution forms a healthy microclimate in the house, which is especially important for allergies.
Everyone knows that during winter central and electric heating dry the air. Dry air has adverse effects on skin, human mucosa, plants. Water Warm Plinth uses comfortable radiant heat, maintains optimal humidity and does not dry the air.
The design of the Warm Plinth when used is absolutely safe, including for children. She can ‘t be burned or hurt.

Warm Plinth can be installed even after finishing works have been completed in the house without disturbing the interior space. Hidden piping is done at the bottom along the walls in the aluminum duct. For this purpose “false plinth” (without heating module) is used. This is called “plinth wiring.” We offer already ready system of plinth heating with thought-out units and materials.

The installation of plinth heating will reduce the cost of heating a private house by 30%.

Owners of country housing know that the main item of expenses is spent on heating. At the same time, often, especially during the cold season, the house is uncomfortable: the walls are cold, and ceilings, finishing and furniture suffer from damp. Where does heat leave? How to reduce the cost of heating at home without saving on your health and home cozy?

When heated by the Warm Plinth system, the comfortable air temperature is 1-2 ° C lower compared to the use of conventional radiators. And each degree by which the temperature decreases saves up to 6% of the energy consumption.
When the warm walls are combined with the warm floor, the temperature comfort is the most complete
As room height increases, the difference in energy efficiency between conventional radiators and the modern Warm Plinth heating system only increases.
Plinth heating is the most optimal heating when used in rooms with a trendy second light today, as well as panoramic glazing.

Plinth heating is used to create extra comfort in apartments

The modern apartment can use both an electric Warm Plinth and a water Warm Plinth. In water version water is used as heat carrier. When connecting the water plinth to the central heating, it should be taken into account that the water temperature in the riser can be 85-90 degrees and the pressure is 8-10 atmospheres. The recommended temperature of the coolant in the plinth system is 65-70 degrees, and the pressure is 3 atm. Therefore, it is necessary to separate the internal heating circuit in the apartment from the central network and lower the coolant temperature to the necessary characteristics by means of a heat exchanger. The maximum length of one loop of the system is 12.5 m. With the longer length of the plinth to be installed, a collector will be required.

Possibility of connection

Connection to the central heating system.
Organization of main autonomous heating.
In multi-storey buildings with a system of radiation heating (two vertical risers made of steel pipes). Distribution manifold equipped with water treatment filter and shutoff valves is connected to each riser. Heat carrier (hot water) is supplied to collector and then to heating plinth. The plinth heating system will allow uniform heating. The advantages of such a heating system with beam wiring are: economy, efficiency, ease of installation and repair, autonomy, possibility to install a heat meter.

Warm Plinth system is recommended for installation of panoramic glazing

Panoramic glazing, windows as the whole wall, picturesque views from the window – signs of elite modern housing and mostly presented in business class housing, penthouses.

Panoramic windows have both pros and cons. Glass “walls” provide maximum daytime lighting. However, in summer excess sunlight leads to very hot in the room, and in winter, on the contrary, cold, as a large area of glazing leads to significant heat losses.

The thermal conductivity of the glass is significantly higher than that of the walls. Therefore, it is necessary to use more energy-efficient window systems, as well as to increase the intensity of heating of the room.

To raise the temperature of the inner glass surface above the dew point, the heating equipment should be installed along the perimeter of the window block. However, the installation of a convector or radiator against the background of panoramic glazing will ruin the aesthetics of the room, and internal convectors will require complex and expensive construction works. Top-or-side heat veils are also not aesthetic for modern elite housing.

Therefore, for heating glass structures, the choice is made in favor of plinth heating.

The heating plinth creates an effective thermal barrier to the cold.
The installation does not require preparatory construction works.
Modern materials allow the plinth to be attached directly to the glass.
The warm plinth does not disrupt the aesthetics of the room and does not block the panorama opening from the window.
The variety of color solutions of the plinth allows to emphasize the stylish design of the interior.

Installation of plinth heating in the erker

Heat losses in a room with an erker are usually higher than with straight walls. The installation of a warm plinth completely solves the cold problem. The system fits perfectly into the interior, and does not “steal” the space in the erker itself, as it does the radiator.

Warm plinth is an indispensable heating device for erkers made in the form of a semicircle.

System Warm Plinth – perfect heater for heating loggia and balcony

With the Warm Plinth system, you ‘ll turn a cold loggia or glazed balcony into a workroom, gym, winter garden or just a warm cosy place to relax, adding warmth and comfort.

Heating the balcony is certainly worth starting with its insulation.
You cannot use central heating radiators to heat a loggia or balcony. It is prohibited by law to withdraw central heating to the balcony in order not to disrupt the entire heating system of the house.
The option of electric heating appliances remains. A plinth system of electrical type is mounted on the outer wall or perimeter of the room. Heating up, she emits heat, which slowly rises down the wall, uniformly heats her. A heat curtain is formed between the room and the cold penetrating into it. Warm walls are free of moisture and less conduct heat to the outside. Heated walls themselves create warmth that is comfortably perceived by our body.

Solar station offers modern heating balcony and loggia – Warm Plinth

In a plinth system, thermal radiation rather than convection is a method of heat transfer. The warm plinth is mounted on the outer wall or perimeter of the room. Heating up, it emits heat, which slowly rises down the wall, uniformly heats it. A heat curtain is formed between the room and the cold penetrating into it. Warm walls are free of moisture and less conduct heat to the outside. Heated walls themselves emit heat that is comfortably perceived by our body.

How to Arrange Pool Heating

“It is very important to create and maintain a healthy microclimate and comfortable temperature of stay of a person in a sports hall, fitness center, pool.”

The person is engaged in a sports hall – his pulse increases, breathing becomes deep. This means that a person inhales several times more harmful dust particles in the air. An optimal way to reduce the movement of dust and other particles in gym air is to reduce the convective component of heating.

Convection is actually air movement. With increasing intensity of room heating, through effect is created – circulation of dust particles and pathogenic bacteria is accelerated.

Thus, the system of plinth heating not only creates a healthy microclimate, but also allows with the same sense of comfort to reduce the temperature in the room by 3-4 degrees, which is so important in sports.

The system is efficient in high-ceiling rooms, large indoor complexes and stadiums.

Equip heating in the gym and fitness center so that everyone is comfortable.

Business centers, banks, offices, exhibition and concert halls, rooms with high ceilings or a large area of panoramic glazing.

In the age of modern technologies, architecture made of glass and concrete, public buildings are lined with trendy translucent structures. However, when the room has a large glazing area, it is difficult to pick up heating. We recommend the Warm Plinth system.

Cultural monuments: museums, galleries, temples, cathedrals, mansions

According to experts of museum climatology, the plinth heating system is today the best technology contributing to the preservation of frescoes, tapestries, paintings, ancient furniture, set parquet and musical instruments. The Warm Plinth system maintains constant temperature and humidity parameters, which is a prerequisite for preserving unique historical exhibits. Dry, warm walls prevent mold and fungus from forming. For nothing, the Vatican uses the Warm Plinth as a heating system for its historic premises and temples.

The chief climatologist of the Russian Museum, after studying the impact of the system on the climate in the halls, concluded on the effectiveness of installing a warm plinth on historical sites as the best means of preserving cultural heritage.

Children ‘s institutions and health centres

Warm Plinth can be used even in resuscitation departments, as it does not affect the operation of expensive medical equipment.

Radiation, with the same wavelength as the sun, transmits heat to objects – it is the most comfortable for a person to perceive heat.

Heating objects rather than air, the plinth system allows to reduce the temperature of comfortable stay in the room by 3-4 ° C (from 22 ° C to 19 ° C), which is extremely useful for patients with heart failure and hypertension.