What is the difference between a plinth system and conventional heating systems?

Answer: Traditional heating appliances create convective flows with air circulation. Cold air is heavier and down, warm air rises up to the ceiling where a heat cushion forms. This pillow takes 30% of any energy carrier.

The warm plinth works in combination with the wall. Due to the precisely matched profile and thermal power, the plinth transfers heat to the wall and then the warm, dry wall emits heat, like an oven. The warmth of the walls can be felt almost immediately. The heat of the walls has a beneficial effect on the microclimate of any room and person.

What boiler equipment does the system work with?

Answer: With any boiler equipment.

On which surface of the wall is it better to install a warm plinth?

Answer: Elements of the plinth system are easily mounted on any surface: wood, gypsum board, stone or brick masonry, glazing, etc. Installation is performed after complete internal finishing of walls and floor.

Does a warm plinth solve the cold problem in rooms with raw walls?

Answer: Of course. Humidity increases thermal conductivity of the material and reduces thermal resistance of the structure. Wet walls have a higher coefficient of thermal conductivity and have worse thermal protection characteristics than dry walls. A warm plinth is installed along the outer walls connected to the street. It heats the walls, creates a heat shield and a barrier to cold penetration.

Is it possible to leave the electric warm plinth on the cottage switched on in the long absence?

Answer: Yes, and it is absolutely safe. The system has a security certificate. All connections are made by silicone cable with heat resistance of 180 ° c. Connection points are isolated by heat-shrink tubes and closed by contact group boxes. In the electric heating system, control options with electronic thermostats with weekly temperature control are possible.

Is it possible to install a warm water plinth in an apartment with a single tube wiring system?

A. Possibly provided a small circulation pump is installed. In rooms where the supply of pipes for the liquid system is complicated, it is recommended to use electric plinth to create a comfortable stay in the off-season when central heating is turned off and in winter with a lack of heat or raw walls.

Can a warm plinth system be installed on the balcony?

Answer: It is probably only necessary to install the electric system Warm Plinth. According to the Housing Code of the Russian Federation – the withdrawal of water heating system to balconies and loggia is prohibited.

Is it possible to install a warm plinth system with panoramic glazing?

Answer: To install the Warm Plinth system with windows in the floor you will need additional equipment: you can buy a mounting bar or mounting corner (aluminium profile), or you can buy a conventional wooden plywood yourself. The profile (or plywood) is attached to the window frames, or to the floor, and already on them the Warmest Plinth is installed.